Graphtec FC8600
$5,995.00
FC8600 series has a maximum cutting speed of up to 58.5 inches per second delivering a cutting force up to 600 gf, 4.0G maximum acceleration — delivering unsurpassed 50 feet* tracking.
Warning: Trying to access array offset on value of type bool in /www/digiprint_778/public/wp-content/plugins/woocommerce-bulk-pricing/classes/wc_bulk_pricing.class.php on line 599
Warning: Trying to access array offset on value of type bool in /www/digiprint_778/public/wp-content/plugins/woocommerce-bulk-pricing/classes/wc_bulk_pricing.class.php on line 601
- Description
- Additional information
- Reviews (0)
Description
Graphtec FC8600 Series
FC8600 series has a maximum cutting speed of up to 58.5 inches per second delivering a cutting force up to 600 gf, 4.0G maximum acceleration — delivering unsurpassed 50 feet* tracking. Graphtec FC8600 series of cutting plotters lead the way in aftermarket automotive styling. Cut window tint film, paint protection film and body graphics.
BEST PERFORMING CUTTER IN ITS CLASS
FC8600 series premiere cutting plotter providing higher productivity and greater ease of use
Fastest cutting speed in its class:
1485 mm/s maximum cutting speed for the higher productivity.
Highest cutting force in its class:
5.88 N (600 gf) maximum cutting force for a wide variety of applications. Expands the range of
possible cutting media such as thick film.
Reliable long-length tracking:
Guaranteed 50 ft tracking and accuracy. (*1)
Includes basket and push rollers with 3 different pressure settings (*2) to provide a more stable media feed and to support a wider range of media.
*1. Operated with Graphtec specified media and conditions.
*2. The center push rollers have 3 pressure settings, the end push rollers have two pressure settings.
Five sizes to match all requirements:
The series includes cutting widths of 61 cm (24 in.) to 162 cm (64 in.).
Specifications
Specifications
| Model | FC8600-60 | FC8600-75 | FC8600-100 | FC8600-130 | FC8600-160 |
| CPU | 32-bit CPU | ||||
| Configuration | Grit rolling type | ||||
| Drive method | Digital servo drive | ||||
| Max. cutting area (W x L) (*1) | 24 in x 164 ft
610 mm x 50 m |
30 in x 164 ft
762 mm x 50 m |
42 in x 164 ft
1067 mm x 50 m |
54 in x 164 ft
1372 mm x 50 m |
64 in x 164 ft
1626 mm x 50 m |
| Cutting area of guaranteed accuracy (*2) | 23.23 in x 50 ft | 29.21 in x 50 ft | 41 in x 32 ft, 35.2 in x 50 ft | 53 in x 32 ft, 35.2 inx 50 ft | 63 in x 32 ft, 35.2 in x 50 ft |
| Mountable media width | 2 in to 30.3 in
Min. 1.97 in |
2 in to 36.2 in
Min. 1.97 in |
2 in to 48.2 in
Min. 1.97 in |
2 in to 60.2 in
Min. 1.97 in |
2 in to 72.5 in
Min. 1.97 in |
| Max. cross cut width | 734 mm | 886 mm | 1191 mm | 1496 mm | 1750 mm |
| Number of push rollers | 2 rollers | 2 rollers | 3 rollers | 3 rollers | 4 rollers |
| Max. cutting speed | 1485 mm/s at 45° direction | ||||
| Axial acceleration | Max. 39.2 m/s2 (4 G) in 8 steps | ||||
| Cutting force | Max. 5.88 N (600 gf) in 48 steps | ||||
| Mechanical resolution | 0.005 mm | ||||
| Programmable resolution | GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm | ||||
| Distance accuracy (*2) | Max. 0.1 mm or 0.1 % of plotted length | ||||
| Repeatability (*2) | Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media) | ||||
| Minimum character size | Approx. 3 mm alphanumeric (varies depending on character font and media) | ||||
| Mountable number of tools | 1 tool (cutting blade, plotting pen or pouncing tool) in standard; 2 tools (cutting blade and plotting pen) when second penholder (optional) is installed |
||||
| Blade types | Supersteel (0.9 mm or 1.5 mm diameter) | ||||
| Pen types | Water-based fiber-tip pen, Oil-based ballpoint pen | ||||
| Pouncing tool type | Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12) | ||||
| Media types (*3) | Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick, Sandblast resist rubber up to 1 mm thick |
||||
| Compatible paper for pouncing | Regular paper from 0.06 to 0.13 mm thick | ||||
| Light pointer | Built into the tool carriage | ||||
| Cross-cutter | Built into the tool carriage | ||||
| Perforation cutting | Supported (performed by force control) | ||||
| Registration mark sensing system | Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect | ||||
| Standard interface | USB2.0 (High speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX) | ||||
| Buffer memory | 2 MB | ||||
| Command sets | GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select) | ||||
| Condition settings | Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user) | ||||
| Display | Graphic type LCD (3-inch, backlight) | ||||
| Power source | 100 V to 240 V AC, 50 / 60 Hz | ||||
| Power consumption | Max. 160 VA | ||||
| Operating environment | 10 to 35 °C, 35 to 75 % R.H. (non-condensing) | ||||
| Guaranteed accuracy environment | 16 to 32 °C, 35 to 70 % R.H. (non-condensing) | ||||
| External dimensions (W x D x H) | Approx. 44″ x 28″ x 48″
(1120 x 711 x 1219 mm) |
Approx. 50″ x 28″ x 48″
(1270 x 711 x 1219 mm) |
Approx. 61.8″ x 28″ x 48″
(1570 x 715 x 1219 mm) |
Approx. 73.6″ x 28″ x 48″
(1870 x 711 x 1219 mm) |
Approx. 84″ x 28″ x 48″
(2130 x 711 x 1219 mm) |
| Weight | Approx. 38 kgs / 106 lbs including stand |
Approx. 52 kgs / 115 lbs including stand |
Approx. 60 kgs / 133 lbs including stand |
Approx. 68 kgs / 150 lbs including stand |
Approx. 73 kgs / 161 lbs including stand |
| Included software (*4) | Windows driver, Plotter controller, Graphtec Pro Studio (*5), Cutting Master 4, Graphtec Studio for Mac |
||||
| Compatible OS (*4) | Windows 10 / 8.1 / 8 / 7 Mac OS 10.7 to 10.12 |
||||
| Compatible Standards | UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC) | ||||
| FCC-A, EN55022-A | |||||
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Model | FC8600 -160, FC8600-130, FC8600-100, FC8600-75, FC8600-60 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.