Epson XP600 DX11 Printhead F1080-A1 — With Epson Seal | DTF, UV & Eco-Solvent
Brand: Epson
Tax excluded. Shipping calculated at checkout
Availability: In stock
The Epson XP600 printhead — model number F1080-A1 — is one of the most widely used printheads in the DTF, UV flatbed, and eco-solvent printing industry. Every unit we sell at Digiprint USA comes with the original Epson Seal Logo intact, confirming it is 100% genuine original, directly sourced, and untampered. This is the highest level of authenticity verification available for this printhead.
Technical Specifications
| Specification | Detail |
|---|---|
| Model number | F1080-A1 (also FA09121 / FA09xxx series) |
| Also known as | Epson DX11, XP600 printhead |
| Technology | Epson Micro-Piezo advanced inkjet |
| Resolution | 1440 dpi native |
| Nozzles | 1,080 nozzles — 6 rows × 180 nozzles per row |
| Nozzle pitch | 1/180 inch per row / 360 npi (2 rows combined) |
| Jetting frequency (single mode) | 46 kHz |
| Jetting frequency (multi mode) | 11.52 kHz |
| Droplet volumes | 4.5, 9, 20, 40 pl (multi-drop support) |
| Ink viscosity range | 3–5 mPa·s |
| Dimensions | 84.9 × 57.2 × 42.6 mm |
| Weight | 60g |
| Ink compatibility | Water-based, UV-curable, eco-solvent |
| Condition | 100% genuine original, brand new, Epson Seal intact |
F1080-A1 vs FA09121 — What is the Difference?
This is the most common question buyers ask. The F1080-A1 and FA09121 are the same physical printhead from the same Epson production line. The difference is the revision code stamped on the chip. Both fit identical printers and perform identically. If your printer manual or board specifies FA09121 or FA09xxx, this listing is compatible — and vice versa. The F1080-A1 version comes with the Epson Seal Logo confirming genuine original status.
Compatible Printers
This printhead is compatible with all DTF printers that use the Epson XP600 / DX11 / F1080 head, including:
Not sure if this fits your printer? Contact us — our US-based support team will confirm compatibility before you order.
XP600 F1080-A1 — The Industry Standard for DTF Printing
The XP600 F1080-A1 is the most widely deployed printhead in the DTF industry. With 1,080 nozzles, 1440 dpi resolution, and multi-drop capability it delivers consistent, high-quality output across thousands of compatible machines worldwide. If your printer is built on the XP600 platform, this is the correct genuine original replacement head.
Why Buy from Digiprint USA
• Epson Seal Logo intact on every unit — the only way to confirm genuine original authenticity
• 100% new — never refurbished, never opened or returned
• In stock in Doral, Miami FL — same day shipping on orders before 2PM EST
• Ideal for Latin American DTF print shops using Miami freight forwarders
• Free technical support — we confirm F1080-A1 vs FA09121 compatibility before you order
View all genuine Epson printheads and parts stocked by Digiprint USA.
Installation Note
When replacing an XP600 printhead always replace the ribbon cables and dampers at the same time. Installing a new head on worn cables or dampers is the most common cause of premature printhead failure. We stock XP600 printhead data cables — add them to your order before checkout. The PDAEPI3200 damper is fully compatible with this printhead.
Warranty notice: Due to the nature of DTF inks, we cannot accept returns, exchanges, or refunds once the printhead has been installed. All sales are final.
Frequently Asked Questions
What is the difference between the F1080-A1 and FA09121?
They are the same physical printhead. F1080-A1 and FA09121 are revision codes for the same XP600 DX11 generation head. Both fit identical printers and perform identically. The F1080-A1 version on this listing comes with the Epson Seal Logo confirming genuine original status.
Does this printhead come with the Epson Seal?
Yes — every F1080-A1 on this listing includes the original Epson Seal Logo intact. This seal confirms the printhead is 100% genuine original and has never been opened, tested and returned, or refurbished. The FA09121 version in our separate listing does not include the seal.
What cables do I need when replacing an XP600 printhead?
You need the XP600 printhead data cables — we stock these and recommend replacing them every time you replace the printhead. Add them to your order before checkout. Installing a new head on worn cables is the most common cause of premature failure.
Is this compatible with my DTF printer?
If your DTF printer uses the XP600 or DX11 printhead it is compatible. Compatible machines include Fedar FD30, Yuxunda DTF-300plus and DTF-400plus, Colorsun 30CM-C and 42CM, and Sinotec Ollin OL XP600 among others. Contact our team with your exact printer model to confirm before ordering.
