Epson i1600-A1 Printhead Guide
Resource Center › Knowledge Center
The Epson i1600-A1 is a mid-tier PrecisionCore MicroTFP water-based printhead with 1,600 nozzles (4 rows × 400), native 600 dpi resolution, and a typical DTF lifespan of 4–8 months — sitting between the XP600 (1,080 nozzles, 3–6 months) and the i3200-A1 (3,200 nozzles, 4–12 months) in throughput and price. The most critical purchasing consideration for the i1600-A1 is cable variant: it is available in both 14-pin and 16-pin FFC data cable configurations depending on the printer model, and these are not interchangeable — installing the wrong cable type prevents the head from functioning. Confirm your printer's cable specification before ordering. At every installation, replace all ink dampers, the capping station, and the wiper blade without exception — the i1600's higher throughput versus the XP600 means accessories wear faster and should never be reused from the previous head. All three heads in the Epson PrecisionCore DTF lineup require different printer hardware and are not interchangeable with each other.
The Epson i1600-A1 is a PrecisionCore MicroTFP water-based printhead used in mid-volume DTF, sublimation, and textile printing. It sits between the XP600 and i3200 in nozzle count, throughput, and price — a strong mid-tier choice for growing print shops.
i1600-A1 specifications
Critical: 14-pin vs 16-pin cable variants
The i1600-A1 is used in printers with either a 14-pin or 16-pin FFC data cable connection — and these are not interchangeable. Installing the wrong cable type will prevent the head from functioning. Confirm your printer's cable specification before ordering.
| Cable type | Common in | Note |
|---|---|---|
| 14-pin FFC | Most i1600-A1 DTF and sublimation printers | Same cable as i3200 family |
| 16-pin FFC | Some specific DTF printer models | Confirm with your printer documentation before ordering |
If unsure which cable your printer uses, contact us with your printer brand and model before ordering — printheads are final sale once installed.
i1600 vs XP600 vs i3200 — at a glance
| Factor | XP600 | i1600-A1 | i3200-A1 |
|---|---|---|---|
| Nozzles | 1,080 | 1,600 | 3,200 |
| Resolution | 1,440 dpi (interpolated) | 600 dpi (native) | 600 dpi (native) |
| DTF lifespan | 3–6 months | 4–8 months | 4–12 months |
| Throughput | Entry | Mid | High |
| Interchangeable | No — all require different printer hardware | ||
What to replace at installation
Replace all dampers, capping station, and wiper blade at every i1600 installation. The i1600's higher throughput vs XP600 means accessories wear faster — never reuse old accessories from the previous head.
→ Shop i1600 dampers · Capping stations · Wiper blades
Confirm compatibility before ordering
info@digiprint-usa.com · +1 (773) 451-5110 · Same-day shipping before 2 PM EST from Doral, FL
