HP Scitex FB700 sFRM Printhead L1Q41-67065

The HP Scitex FB700 sFRM Printhead (part number L1Q41-67065, superseding CQ114-67019) is the genuine original replacement printhead for the HP Scitex FB-series large-format UV flatbed and roll-to-roll printers. Built on the Ricoh / Hitachi GEN3-E3 platform (also referenced as MH1603 / MH1803 / MH1903 / 338690-001), this is a full metallic-construction industrial printhead with D33 Stacked PZT piezo technology, an integrated heater and thermistor, and a rated service life of 100 billion actuations per nozzle. It is the same head platform used across the HP Scitex FB, Fujifilm Uvistar, Matan Barak, and DYSS Apollo product lines — one of the most widely deployed UV flatbed printhead architectures in the industry. Every L1Q41-67065 we stock at Digiprint USA is 100% genuine original HP Scitex — not aftermarket, not compatible, not refurbished.

Sub-ink tank CH104-67001 is NOT included and has been discontinued by HP. This listing is for the printhead only ("Printhead Only" = sFRM without sub-tank). The sub-ink tank CH104-67001 that originally shipped with the sFRM assembly is no longer available from HP. If your replacement workflow previously included the sub-tank, it must be sourced separately through the secondary market — confirm availability before scheduling your service. Contact us if you need sourcing assistance.

Part number update — L1Q41-67065 replaces CQ114-67019. HP superseded the original part number CQ114-67019 with L1Q41-67065. Both numbers refer to the same GEN3-E3 printhead. If your service manual, parts list, or previous order history shows CQ114-67019, the L1Q41-67065 is the current active replacement. No configuration changes are required on installation.

Technical Specifications

Specification	Detail
HP Part Number	L1Q41-67065 (supersedes CQ114-67019)
Platform	Ricoh / Hitachi GEN3-E3 (MH1603 / MH1803 / MH1903 / 338690-001)
Technology	D33 Stacked PZT piezo on-demand
Total nozzles	192 nozzles / 192 independent channels
Nozzle spacing	0.3387 mm
Native resolution	Up to 360 dpi
Native drop volume	30 pl or 45 pl (selectable)
Drop volume range	12 – 50 pl
Max jetting frequency	Up to 30 kHz
Internal heater	Yes — integrated heater and thermistor
Operating temperature	Up to 80°C
Head materials	Stainless steel (SST), Palladium (Pd), Epoxy Adhesive
Nozzle plate surface	Non-coated stainless steel
Dimensions	7.8 × 120 × 35 mm (excluding cables)
Rated service life	100 billion actuations per nozzle
Sub-ink tank included	No — CH104-67001 discontinued by HP, not included
Country of origin	Japan
Condition	100% genuine original HP Scitex, brand new

Compatible Printers

HP Scitex

• HP Scitex FB500

• HP Scitex FB550

• HP Scitex FB700

• HP Scitex FB750

• HP Scitex FB950

Fujifilm

• Fujifilm Uvistar

• Fujifilm Uvistar II

• Fujifilm Uvistar Pro 8

Matan / Barak

• Matan Barak 4Q

• Matan Barak 8Q

• Matan Barak 8QW

• Matan Barak HS

• Matan Barak iQ

DYSS

• DYSS Apollo R220

• DYSS Apollo UV-RF2200

Not sure this is the correct head for your specific machine or serial number? Contact us before ordering — we confirm L1Q41-67065 compatibility for your printer configuration at no obligation.

What Does "sFRM" Mean?

sFRM stands for Sub-Frame Replacement Module — HP's terminology for the printhead assembly as a serviceable replacement unit within the FB-series printer carriage architecture. The sFRM designation distinguishes this head assembly (printhead body only) from the full FRM (Frame Replacement Module) which historically included the sub-ink tank. Since HP has discontinued the sub-ink tank component CH104-67001, the sFRM designation now effectively describes what ships: the printhead itself, ready for installation into an existing carriage with its existing ink delivery infrastructure.

About the Ricoh / Hitachi GEN3-E3 Platform

The GEN3-E3 is the third generation of Ricoh's industrial D33 Stacked PZT printhead platform, co-developed with Hitachi and deployed across multiple OEM UV flatbed lines under different brand designations. The D33 Stacked PZT architecture uses stacked piezoelectric actuators in a shear-mode configuration that delivers high force per actuation at lower drive voltages — enabling reliable jetting of high-viscosity UV inks while maintaining precise drop placement accuracy at drop volumes from 12 to 50 pl. The full metallic stainless steel and palladium construction of the GEN3-E3 gives it exceptional chemical resistance to UV-curable ink formulations, and the non-coated SST nozzle plate is specifically suited to UV inks that would attack polymer-coated nozzle surfaces used in aqueous heads. The 100 billion actuations-per-nozzle service life rating makes it one of the most durable printhead platforms in its class for high-volume production UV flatbed environments.

Cross-Brand Compatibility Note

The GEN3-E3 is the same physical printhead platform used across the HP Scitex FB, Fujifilm Uvistar, Matan Barak, and DYSS Apollo product lines. These printers were all built around the same Ricoh/Hitachi GEN3-E3 head architecture, meaning the L1Q41-67065 is the correct service part regardless of which brand name appears on your printer chassis. If you are servicing a Fujifilm Uvistar or Matan Barak and have been searching for the Ricoh MH1803 or 338690-001 part number — this is the same head, supplied as the HP-labelled equivalent.

Applications

• UV flatbed wide-format printing — rigid substrate output on the HP Scitex FB series and equivalent platforms

• UV roll-to-roll — flexible substrate UV production on compatible configurations

• High-volume commercial sign and display — long-run production environments where 100B actuation life is a critical uptime factor

• Multi-brand service operations — shops servicing HP Scitex, Fujifilm Uvistar, Matan Barak, and DYSS Apollo from a single stocked part

Warranty Notice

Due to the sensitive nature of industrial UV printhead components, we cannot accept returns, exchanges, or refunds once the printhead has been installed. All sales are final. Warranty claims require documentation of the full installation procedure, inks used, nozzle test prints, and any error codes encountered. Contact our team with any compatibility or configuration questions before ordering.

Why Buy from Digiprint USA

• 100% genuine original HP Scitex L1Q41-67065 — not aftermarket, not refurbished

• Current active part number — L1Q41-67065 is the HP-current supersession of CQ114-67019

• In stock in Doral, Miami FL — same day shipping before 2PM EST

• Serves HP Scitex, Fujifilm, Matan/Barak, and DYSS Apollo installations from a single stocked part

• Free technical support — we advise on sub-tank sourcing, part number cross-reference, and installation sequencing before you order

View our full range of genuine HP Scitex printheads and spare parts stocked by Digiprint USA.

Frequently Asked Questions

Is the L1Q41-67065 the same as CQ114-67019?
Yes. HP superseded the original part number CQ114-67019 with L1Q41-67065. The physical head and specifications are identical — the new number simply reflects HP's current active part catalogue entry. If your documentation references CQ114-67019, the L1Q41-67065 is the correct current replacement with no modifications required.

Is the GEN3-E3 the same as Ricoh MH1803 or 338690-001?
Yes. The GEN3-E3 platform is sold under multiple OEM part numbers depending on the printer brand. The Ricoh/Hitachi part numbers MH1603, MH1803, MH1903, and 338690-001 all refer to the same GEN3-E3 head assembly. The L1Q41-67065 is the HP-branded variant of this same platform, supplied through HP's service parts channel.

Can I get the sub-ink tank CH104-67001 separately?
The CH104-67001 sub-ink tank has been discontinued by HP and is no longer available through new stock channels. It must be sourced through the secondary market if required. Contact us — we may be able to assist with sourcing or advise on alternative ink delivery configurations for your specific FB-series printer.

What ink types are compatible with the L1Q41-67065?
The GEN3-E3 / L1Q41-67065 is designed for UV-curable inks as used in the HP Scitex FB series. The non-coated stainless steel nozzle plate and full metallic construction are specifically suited to UV ink chemistry. Do not use aqueous or solvent inks — these are not compatible with the FB-series ink system and will damage the printhead and printer.

Do you ship the HP Scitex FB700 printhead to Latin America?
Yes — same day shipping from our Doral, Miami FL warehouse. Our location is ideal for Latin American HP Scitex, Fujifilm, and Matan service operations using freight forwarders in the Doral area.