Mimaki JV34-260 Print Head ID Set M010792

The Mimaki JV34-260 Print Head ID Set (part number M010792) is the genuine original replacement printhead assembly for the Mimaki JV34-260 and TS34-1800A large-format eco-solvent printers. Built on Epson DX7 Micro-Piezo technology, this printhead delivers 1,440 nozzles across 8 independent ink channels with variable drop sizes from 1.5 pl to 21 pl — covering the full range from fine detail to high-speed flood fill in a single head. It is sold as a complete "Print Head ID Set," meaning the head ships with its associated ID chip pre-registered, ensuring correct printer recognition and ink channel mapping on installation. Every M010792 we stock at Digiprint USA is the genuine original Mimaki-labelled part, sourced directly — not compatible, not refurbished.

Eco-solvent and mild solvent inks only. The M010792 is designed for Mimaki SS21, ES3, and compatible eco-solvent ink formulations. It is not rated for hard solvent, UV-curable, or aqueous inks. Using incompatible inks will cause nozzle plate and seal damage and will void any warranty claim. Confirm your ink system before ordering.

Installation advisory — replace head cables at the same time. It is strongly recommended to replace the head data cables when installing a new M010792 printhead. Worn cables from the previous head are a leading cause of nozzle drop-out and communication errors post-installation, and are not covered under printhead warranty. Order your replacement cables before scheduling the swap.

Technical Specifications

Compatible Printers

• Mimaki JV34-260

• Mimaki TS34-1800A

Not sure this is the right head for your machine? Contact us before ordering — we confirm M010792 compatibility for your specific printer and serial number at no obligation.

What Is a "Print Head ID Set"?

Mimaki supplies certain replacement printheads as "ID Sets" rather than bare heads. The ID Set includes the printhead assembly together with a pre-registered ID chip that the printer firmware uses to authenticate the head, map ink channels, and calibrate nozzle firing patterns. Installing a bare head without a matched ID chip will result in printer errors or incomplete channel recognition on Mimaki JV34 and TS34 systems. The M010792 ID Set eliminates this issue — the head arrives ready to install and register with the printer's maintenance menu, with no separate chip programming required.

About the Epson DX7 Micro-Piezo Technology

The M010792 is built on the Epson DX7 Micro-Piezo printhead platform — one of the most widely deployed eco-solvent printhead architectures in the wide-format industry. The DX7 brought a step-change in minimum drop size (1.5 pl) over its predecessor (DX5 at 3.5 pl minimum), enabling finer gradients, sharper text, and smoother tonal transitions without additional passes. Its 1,440-nozzle layout across 8 independent ink channels supports both 4-colour and 8-colour ink configurations, giving the JV34-260 the flexibility to run CMYK + spot colour, CMYK + white/varnish, or full 8-colour extended gamut setups on a single head. Variable drop technology means the head selects from a range of drop sizes per dot in real-time — combining speed and quality in a single pass without a fixed trade-off between the two.

Damper Requirement

The M010792 requires DX6 Valve Dampers — not standard DX7 dampers. This is a common source of installation errors. DX6 valve dampers include an internal check valve that regulates ink back-pressure on the JV34 ink delivery system. Using standard dampers without the valve seat will cause ink flow instability and nozzle dropout even with a new head installed. If your dampers are due for replacement, order DX6 valve-type dampers together with the printhead.

Applications

• Large-format eco-solvent signage — banners, vehicle wraps, POS displays, and outdoor graphics on the Mimaki JV34-260

• Textile transfer printing — sublimation transfer output on the Mimaki TS34-1800A using compatible transfer inks

• 4-colour and 8-colour configurations — CMYK, extended gamut, spot colour, and specialty channel setups

• High-detail fine art and photographic output — 1.5 pl minimum drop enables gallery-quality gradients and smooth tonal work

Warranty Notice

Due to the sensitive nature of inkjet printhead components, we cannot accept returns, exchanges, or refunds once the printhead has been installed. All sales are final. Warranty claims require documentation of the installation procedure, inks used, nozzle test prints, and head cleaning logs. Use of inks other than eco-solvent or mild solvent formulations will immediately void the warranty. Contact our team with any compatibility questions before ordering.

Why Buy from Digiprint USA

• 100% genuine original Mimaki M010792 — not compatible, not refurbished, not grey-market

• Complete Print Head ID Set — pre-registered chip included, no separate programming required

• In stock in Doral, Miami FL — same day shipping before 2PM EST

• Ideal for Latin American Mimaki service shops using Miami freight forwarders

• Free technical support — we advise on damper type, cable replacement, and installation sequencing before you order

View our full range of genuine Mimaki printheads and spare parts stocked by Digiprint USA.

Frequently Asked Questions

What is the difference between M010792 and MP-M010792?
These are the same part. M010792 is the standard Mimaki part number; MP-M010792 is an alternate prefix format used by some distributors and service documentation. Both refer to the identical JV34-260 / TS34-1800A Print Head ID Set.

Does the M010792 work with the Mimaki CJV150 or JV300?
No. The M010792 is specific to the JV34-260 and TS34-1800A. The CJV150, JV150, JV300, and CJV300 use a different head — part number M015372. Contact us to confirm the correct part for your specific Mimaki model before ordering.

Why do I need DX6 valve dampers with the DX7 head?
The Mimaki JV34-260 ink delivery system was designed around DX6-style valve dampers, which include an internal check valve for back-pressure regulation. Even though the M010792 printhead is DX7 technology, the damper interface on the JV34 requires the valve-type DX6 damper — not a standard open-flow DX7 damper. Mixing these causes ink pressure instability and nozzle dropout.

Should I replace the head cables when I install a new M010792?
Yes — strongly recommended. Head data cables degrade over the printhead's service life through repeated flexing and ink exposure. A new head paired with worn cables is a common cause of intermittent nozzle errors that are incorrectly attributed to the head itself. Replacing cables at the same time as the printhead eliminates this variable and protects the warranty on the new head.

Do you ship the Mimaki M010792 to Latin America?
Yes — same day shipping from our Doral, Miami FL warehouse. Our Miami location is the ideal supply point for Latin American Mimaki service centres and print shops using freight forwarders in the Doral area.