Graphtec CB09UB-K60 Super-Steel Blade 30° 0.9mm | 2-Pack FC FCX CE

The Graphtec CB09UB-K60 is a genuine original super-steel cutting blade with a 30° cutting angle and 0.9mm diameter — specifically engineered for window tint film, thin films, and delicate materials up to 0.25mm thick. The shallower 30° angle produces a finer cutting edge than the standard 45° blade, making it the correct choice for intricate cuts in thin flexible media where the standard blade would cause tearing or lifting. This listing is the CB09UB-K60-2 pack — 2 blades per pack. Every CB09UB-K60 we sell at Digiprint USA is 100% genuine Graphtec.

Product Details

30° vs 45° Blade — Which Do You Need?

This is the most important question for Graphtec blade selection. The cutting angle determines which materials the blade handles correctly:

If you are cutting standard adhesive vinyl or heat transfer vinyl, use the CB09UB 45° blade. If you are cutting window tint film, PPF (paint protection film), or other thin flexible films where the 45° blade causes tearing or lifting at fine detail, the CB09UB-K60 30° is the correct choice.

Compatible Graphtec Models

CE Series vinyl cutters: CE6000-40, CE6000-60, CE6000-120, CE7000-40, CE7000-60, CE7000-130

FC Series cutting plotters: FC8000-75, FC8000-100, FC8000-130, FC8000-160, FC9000-75, FC9000-100, FC9000-130, FC9000-160

FCX Series flatbed cutters: FCX2000 series

Contact our team to confirm CB09UB-K60 compatibility with your specific Graphtec model before ordering.

Applications

• Window tint film — intricate cuts in thin tint film without tearing or delamination at fine detail curves

• PPF (paint protection film) — precise cutting of paint protection film for automotive and protective applications

• Thin flexible films up to 0.25mm — delicate media requiring a finer, more acute cutting edge

• Intricate designs in thin self-adhesive films — fine detail work where the 45° blade would cause lifting or tearing

When to Replace

Replace CB09UB-K60 when you notice:

• Tearing or lifting of thin film instead of a clean cut

• Incomplete cuts or dragging through fine detail areas

• Visible tip chipping or deformation under magnification

• Increased cutting force required to maintain the same cut quality in thin film

Why Buy from Digiprint USA

• 100% genuine original Graphtec CB09UB-K60 — not aftermarket, not generic

• In stock in Doral, Miami FL — same day shipping before 2PM EST

• We also stock the CB09UB 45° blade 5-pack and full range of Graphtec blades and spare parts

• Ideal for Latin American sign shops and window tint installers using Miami freight forwarders

Frequently Asked Questions

What is the difference between 30° and 45° Graphtec blades?
The 30° blade (CB09UB-K60) has a shallower cutting angle that produces a finer, more acute cutting edge. This makes it ideal for window tint film, PPF, and thin flexible films where the standard 45° blade can cause tearing or delamination at fine detail curves. For standard adhesive vinyl and HTV, use the CB09UB 45° blade.

What blade holder does the CB09UB-K60 require?
The CB09UB-K60 uses the PHP33-CB09N-HS blade holder — the same holder as the standard CB09UB 45° blade. The blade holder is the same; only the blade angle changes. Always verify blade offset settings in your Graphtec software when switching between 30° and 45° blades.

Can I use the 30° blade for standard vinyl cutting?
You can, but the 45° blade is the better choice for standard adhesive vinyl, HTV, and sign vinyl. The 30° blade is optimised for thin films and window tint where its shallower angle prevents tearing. Using the 30° blade on thicker standard vinyl materials will result in faster blade wear.

Why does this come in a 2-pack rather than 5-pack?
The CB09UB-K60 is a specialist blade for thin film and window tint applications — it is used less frequently than the standard 45° blade in most sign shops. The 2-pack size reflects typical usage volume. If you need a larger quantity, contact our team for bulk pricing.

Do you ship Graphtec blades to Latin America?
Yes — same day shipping from our Doral, Miami FL warehouse. Our Miami location is ideal for Latin American sign shops and window tint installers using freight forwarders in the Doral area.